Welcome to VIDCAM's SHARP VCR Faults

Models from VCA101 through to VXC...
See Others

Search The WebThis Site for faults for Get a Free Search Engine for Your Web Site

VCR	SHARP	VCA101	Int Stops In Rew/ff.	Earth Cassette Holder Slider By Fitting Spring (msprp0113gefj).
VCR	SHARP	VCA101	Loading Motor Stops Intermittently	Ic803 Load Motor Driver Ic.
VCR	SHARP	VCA101	No Drum Rotation No Drum Afc Apc Ok.	Replace Ic801 Syscon.
VCR	SHARP	VCA101	Not Erasing Audio And Not Recording New Audio	Hard Wire Full Erase Head
VCR	SHARP	VCA101	Shuts Down In Playback Maybe When Warm.	Check Take Up Hub To Be Stiff Or Seized
VCR	SHARP	VCA101	Unit Accepts Tapes Then Ejects Straight Away	Cassette Detect Switch On Top Of Carriage Is Shorted Closed.
VCR	SHARP	VCA103	Hum Bars In Record.	D906, D907, D908, D909 High Resistance
VCR	SHARP	VCA103	Int Stops In Rew/ff	Hard Wire Full Erasee Head.
VCR	SHARP	VCA103	See Vca101
VCR	SHARP	VCA103	White Bar Or Distortion Of Tuner Pic. Only Whilst Recording	Check For Faulty Or Leaky Diode In Power Supply. Check D906, D907, D908 And D909.
VCR	SHARP	VCA103	Won't Accept Cass. If No Cass. In Unit Turns Off.	Check Operation Of Q901, 2sd1565 In Power Circuit.
VCR	SHARP	VCA103	Wont Eject Sometimes.	See Phillips Vr6448
VCR	SHARP	VCA105	At Switch On, Loads Then Unloads - Crazy.	Mode Switch, Clean Contracts, Or Replace.
VCR	SHARP	VCA105	Back Tension Arm Jams On Unload	Replace Plastic Brackets Parts #52 And #53
VCR	SHARP	VCA105	Cassette Jams On Eject	Bend (modify) Pinch Roller Lever Forward 1-1.5 Mil
VCR	SHARP	VCA105	Int Rew/ff From Stop Mode	Replace Idler Ngerh1122gezz
VCR	SHARP	VCA105	Laces Up And Then Unlaces No Head Switch	Fg Pcb Coil O/c On Bottom Of Motor Spike At Contacts Coat With Laquer
VCR	SHARP	VCA105	Power Up Erattic Mechanism	Mode Switch.
VCR	SHARP	VCA105	Wont Accept Tape	Change Sensors Pcb To New Type Duntk3194gezz
VCR	SHARP	VCA111	At Switch On, Loads Then Unloads - Crazy.	Mode Switch, Clean Contacts, Or Replace.
VCR	SHARP	VCA111	Back Tension Arm Jams On Unload.	Plastic Brackets, No: 52 And 53 In Service Manual.
VCR	SHARP	VCA111	Cassette Jams On Eject.	Bend Lever On Pinch Roller Forward 1 - 1.5 Mm.
VCR	SHARP	VCA111	Int Rew/ff From Stop Mode.	Replace Idler. (ngerh1122gezz).
VCR	SHARP	VCA111	Laces Up Then Immediatly Unlaces No H.S.P.	Fg Pcb Coil On Bottom Of Drum Motor O/c. Spike Contracts.
VCR	SHARP	VCA111	See Vca105
VCR	SHARP	VCA111	Won't Accept Tape.	Change Sensor Pcb To New Type. Duntk3194he00.
VCR	SHARP	VCA200	Grey Washed Out Picture In Playback.	Replace Ic401 Y/c Ic Smd ha118201
VCR	SHARP	VCA30	Does Not Erase Old Audio Or Picture In Record.	Erase Head Signal Goes Low And High Intermittent. replace Faulty Capacitor C622 47uf 16 Volt. vertical Sub Board To The Right Of Loading Belts.
VCR	SHARP	VCA45	No Capstan Motor Drive.	Replaced Leaking Capacitor On Capstan Motor Pcb. check Tracks Haven't Been Destroyed By Leaking Electrolyte.
VCR	SHARP	VCA502	All Functions Ok Except Play.No Capstan Drive.	Capstan Drive Ic X0322ge.
VCR	SHARP	VCA502	Eratic Functions When In Rewind,goes F.F.,breaks Tapes.	Display Stays In Rewind....Replace Capstan Motor.
VCR	SHARP	VCA502	Int Stops In Rew/ff.	Earth Cassette Holder Slider By Fitting Spring (msprp0113gefj).
VCR	SHARP	VCA502	Not Erasing Previous Audio Track.	Hard Wire Full Erasee Head.
VCR	SHARP	VCA502	See Sharp Vca101
VCR	SHARP	VCA505	At Switch On, Loads Then Unloads - Crazy.	Mode Switch, Clean Contacts.
VCR	SHARP	VCA505	Back Tension Arm Jams On Unload.	Plastic Brackets, Parts 52 And 53 In Manual.
VCR	SHARP	VCA505	Cassette Jams On Eject.	Bend Lever On Pinch Roller Forward 1 - 1.5 Mm.
VCR	SHARP	VCA505	Int Rew/ff From Stop Mode.	Replace Idler Ngerh1122gezz.
VCR	SHARP	VCA505	Laces Then Immediately Unlaces. No H.S.P.	Fg Pcb Coil On Bottom Of Drum Motor O/c. Spike Contracts.
VCR	SHARP	VCA505	Screen Green No Audio In Playback.	No Control Pulse Dirty Heads.
VCR	SHARP	VCA505	See Sharp Vca105
VCR	SHARP	VCA505	Won't Accept Tape.	Change Sensor Pcb To New Type Duntk3194he00.
VCR	SHARP	VCA510	Cassette Jams On Eject.	Bend Lever On Pinch Roller Forward 1 - 1.5mm
VCR	SHARP	VCA510	See Sharp Vca105
VCR	SHARP	VCA62	In Play Picture Seems Very Slow. Capstan Motor Running Slow. Freeze Main Smd Cpu And Speed Changes.	Main Smd Cpu Ic Faulty. ix0867ge
VCR	SHARP	VCA62	No Go After Storm.No Display.	Transistor Q902 2sc2001 Faulty.
VCR	SHARP	VCB60	See Vcb20 Service Manual
VCR	SHARP	VCD801	Int Stops In Rew/ff.	Earth Cassette Holder Slider By Fitting Spring (msprp-113gefj).
VCR	SHARP	VCD801	Not Erase Previous Audio Track.	Hard Wire Full Erase Head.
VCR	SHARP	VCD801	Tuner Picture Won't Store Clearly.	Adjust Agc Control. Main Pcb In I F Pack. turn Pot.
VCR	SHARP	VCD805	Cassette Jams On Eject.	Bend Lever On Pinch Roller Forward 1 - 1.5 Mm.
VCR	SHARP	VCD805	See Vca101
VCR	SHARP	VCH650	Playback Perfect Black And White.	Replace Faulty Smd Luminance Chroma Ic. Lmha8201cf1
VCR	SHARP	VCH660X	Gets Toward End Of Tape And Picture Is Blue?	Pinch Roller Worn Just Enough To Move Tape Off A/c Head At End Of Tape,due To Tension Change.
VCR	SHARP	VCH710	Powers Up Ok And Accepts Tape But Then Shuts Down And Display Flashes Power On And Off.	Replace Faulty Capstan Motor, Loads Down Power Supply.
VCR	SHARP	VCH83X	Reel Sensor Has No Pulse And Has 12v Where It Should Not!	Found Connectors On Bus Board Between Power Supply And Eject To Have Corrosion From Liquid.
VCR	SHARP	VCH851	Int Stops In Rew/ff.	Earth Cassette Holder Slider By Fitting Spring (msprpo113gefj)
VCR	SHARP	VCH851	Not Erasing Previous Audio Track.	Hard Wire Full Erase Head.
VCR	SHARP	VCH851	See Vca101
VCR	SHARP	VCH855	All Tape Functions Stop After Several Seconds.	Remove And Clean T.U. Reel Sensor, Mounted On Chassis Pcb.
VCR	SHARP	VCH87	Picture O.K. Hi-fi Audio O.K. In P/b And Rec. machine Will Not Play Back Linear Audio.	Replace Faulty Q6306 Transistor With Bc548(check Pin Conn). q6306 Is Surface Mount And Lives On Audio Sub Board(with The Surface Mount Processor).
VCR	SHARP	VCP4100	Capstan Runs All The Time.	C615 Faulty.
VCR	SHARP	VCP4100	Capstan Unlocked.	Change R239 To 390 Ohm, C239 To 22æf, R237 To 2.2m.
VCR	SHARP	VCP4100	Chews Tapes.	Remove T/u Guide Arm Unit.
VCR	SHARP	VCP4100	Colour Flickers.	X302 Faulty.
VCR	SHARP	VCP4100	Colour Patterning, Int Colour.	Remove Earth From Power Lead.
VCR	SHARP	VCP4100	D209 Cooks.	Loom To Dd Shorted To Earth.
VCR	SHARP	VCP4100	Improve Dew Detection.	Change R608 To 56k.
VCR	SHARP	VCP4100	Improve Pg Shift.	Change R215/216 To 18k. Change Vr201/202 To 33k.
VCR	SHARP	VCP4100	Int Colour.	Upc1536c Faulty.
VCR	SHARP	VCP4100	Int Servo Lock.	X301 Must Use Original Type.
VCR	SHARP	VCP4100	Looks Like Heads Faulty.	C306, C301, C3095 Faulty.
VCR	SHARP	VCP4100	Looks Like Heads Faulty.	C329 Faulty.
VCR	SHARP	VCP4100	No Capstan Drive.	C615 Faulty.
VCR	SHARP	VCP4100	No Colour.	C337, C347 Faulty.
VCR	SHARP	VCP4100	No Picture On Play.	C306 Faulty.
VCR	SHARP	VCP4100	Noise Bar Thru Pic Every 3 Minutes.	C229 Faulty.
VCR	SHARP	VCP4100	Patterning On Picture.	Add Earth To Head Leads, Check Lead Dress To Heads.
VCR	SHARP	VCP4100	Pic Goes Off Like Heads When Hot.	C105, Or Dj On Q206 (headswitch).
VCR	SHARP	VCP4100	Pic Noise In Play, As Through In Cue.	C207 Faulty.
VCR	SHARP	VCP4100	Pic Skew In Cue/review.	Change C3a0 To .22æf.
VCR	SHARP	VCP4100	Pic Weak, Horiz Bars.	C387 Faulty.
VCR	SHARP	VCP4100	Picture Beat And Patterning.	C347 Faulty.
VCR	SHARP	VCP4100	Stops After 2 Secs In Play.	Fit New Reel Sensor. Dont Modify.
VCR	SHARP	VCP4100	Tracking Doesn't Adjust.	C205 Fautly.
VCR	SHARP	VCP4100	White Flicker Noise.	C317, C318 Fautly.
VCR	SHARP	VCT510	At Switch On, Loads Then Unloads - Crazy.	Mode Switch, Clean Contacts.
VCR	SHARP	VCT510	Back Tension Arm Jams On Unload.	Plastic Brackets, Parts 52 And 53 In Manual.
VCR	SHARP	VCT510	Laces Then Immediatly Unlaces. No H.S.P.	Fg Pcb Coil On Bottom Of Drum Motoro/c. Spike Contacts, Coats With Laquer.
VCR	SHARP	VCT510	See Sharp Vca105
VCR	SHARP	VCT510	Won't Accept Tape.	Change Sensor Pcb To New Type. Duntk3194he00.
VCR	SHARP	VLC6100	Snowy Picture, Sometimes 1/2 Screen	Replaced Servo Smd Ic. Ir3p71 Lmir3p711 On Main Board
VCR	SHARP	VLM78E	No Colour From Recorded Tape, Pb Ok	10 æ Caps C420. Also 480,411,416. 22 æ Appeared To Be Ok, But Was Replaced.
VCR	SHARP	VLM78E	See Sharp Vlm4x Similar
VCR	SHARP	VLM78E	See Vlm4x	Similar To Vlm4x
VCR	SHARP	XC30	No Video	Check If Nothing At Tp3. Check Q102 Collector Volts Low (18v). Target Connector To Screening Shield S/c.

---

BACK

Last site update: