SETTING UP YOUR TV CARD IN MCE
1. Launch Media Center and select Settings
2. Select TV
3. Select Setup TV Signal
4.Click Yes
5. Click Next
6. Select "Yes, use this region to configure TV services" and Click Next
7. Select the appropriate type of TV signal (eg Antenna) and click Next.
NOTE: If you do not see the above options, and you want to use analogue TV or cable/satellite services, you might as well stop. You will not be able to use any analogue/cable or satellite TV devices. An MPEG encoder such as the one available here http://www.mainconcept.com/site/index.php?id=17773 is required to enable analogue functionality in MCE.
8. Select Analog or Digital as desired
9. Unless you want to setup the TV guide, select "Return to TV Settings" and click Finish
10. Click on "Scan for more services"
11. Select from the list of Digital Tuners (if you selected Digital Tuner in step 8 above)
Digital Tuners Example
.
12. Select from the list of Analog Tuners (if you selected Analog Tuner in step 8 above) and click Next
Analog Tuners Example
13. Click on Start Scan and the relevant channels should begin to tune within a couple of minutes
14. If you wish to Listen to FM Radio, make sure that you have selected Analog Tuner in step 8. Go back to Step 1 and select Radio
15. You should be able to now tune the FM stations and save them.